Need help?Do you have a question about the Manfrotto 7322YB and is the answer not in the manual?
General| Type | Tripod |
|---|---|
| Material | Aluminum |
| Leg Sections | 3 |
| Head Type | Ball Head |
| Load Capacity | 3 kg |
Lightweight tripod designed for digital cameras.
Open the 3 tripod legs. Adjust height by rotating lever "A" on collar "B".
Unlock lever "D" to adjust central column "C" height. Tighten lever "D" to lock.
Remove cap "E", unlock "D", remove column "C". Invert and reinsert. Tighten "D", replace cap "E".
Set legs at 2 angles. Rotate locking button "W" to change angle.
Open lever "H" after disengaging safety lever "I". Peg "L" clicks to hold open.
Screw camera onto plate "G" using "M". Align and ensure secure locking.
Push ring "Q" flat. Insert plate "G" until lever "H" clicks. Rotate safety lever "I". Check lock.
Release safety lever "I" and hold camera while operating lever "H".
Lever "P" locks head movement. Unlock "P" to position ball "N". Lock "P" clockwise.
Manfrotto offers an additional 3 years' limited warranty extension.
Register online at www.manfrotto.com/warranty and keep receipt as proof.
Details Manfrotto's warranty for defects in materials and workmanship.
Authorizes Manfrotto to use provided information for warranty, product improvement, and market research.
Details 2+3 years warranty for Manfrotto products.
To Next Page
