Manitou 150 AETJ - CHECK Platform Controls

CHECK Platform controls
t
IMPORTANT
t
e2-DESCRIPTION for more information on the control panels on the ground and in the basket.
Select a test area on a firm, level surface that is free of any obstacles.
Look around and above you when maneuvering the platform (lifting, rotation, etc.).
Pay particular attention to electric lines and any object that may be within the platform’s field of operation.
Shut the platform down if a malfunction is detected.
GROUND LEVEL CONTROL PANEL
IGNITION SWITCH, BATTERY CUT-OFF AND EMERGENCY STOP BUTTON
The battery cut-off is in the OFF position. The ignition switch is in the position
.
The platform is in transport position. The turntable, the basket and the jib (150AETJ3D (150AETJC3D)) are in neutral position.
The jib is completely lowered.
- Ensure that the emergency stop buttons on the ground level and basket control panels are in the ON position.
- Turn the battery cut-off to the ON position.
- Turn the ignition switch to position
.
NOTE: SECONDARY PROTECTION SYSTEM option SPS,
eCHECK: SECONDARY PROTECTION SYSTEM SPS - FIRST VERSION
"SAFEMANSYSTEM" (OPTION) or eCHECK: SECONDARY PROTECTION SYSTEM SPS - SECOND VERSION (OPTION).
Result:
• The multi-function display must come on.
• The audible alarm should sound once.
- Press the emergency stop button (OFF position).
Result:
• The emergency stop button should be locked in the OFF position.
• The multi-function display must turn off.
- Depending on version:
• Turn the emergency stop button clockwise a quarter turn and release it.
• Pull the emergency stop button or turn it clockwise a quarter turn and release it.
Result:
• The emergency stop button should be unlocked in the ON position.
• The multi-function display must come on.
PLATFORM FUNCTIONS
The platform is switched on. The platform is in transport position. The turntable, the basket and the jib (150AETJ3D
(150AETJC3D)) are in neutral position. The jib is completely lowered.
NOTE:
• ORANGE FLASHING LIGHT option: The orange flashing light must light up when the functions are activated.
• ALL MOVEMENTS ALARM option: The horn must sound intermittently when the functions are activated.
- Do not press the activation button. Try to activate all the functions one by one.
Result:
• It should not be possible to activate any of the functions.
- Press and hold down the activation button.
- Activate all the functions one by one. Check that all the movements are complete up to the mechanical stops.
Result:
• It should be possible to activate all the functions.
• All the movements must operate correctly and smoothly.
• All the movements must be complete up to the mechanical stops.
- Place the platform in transport position. Put the turntable, the basket and the jib (150AETJ3D (150AETJC3D) in neutral
position. Level the basket. Lower the jib completely.
3 - 14
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L