Manitou 150 AETJ - Lift; Occasional Operation; Platform

LIFT Platform
t
IMPORTANT
t
The surface of the departure/arrival zone must be closed, level and even.
If the departure/arrival zone is a flatbed:
- The flatbed must be parked on a level, firm surface.
- The wheels of the flatbed must be chocked.
Make sure that the lifting beam and the lifting slings are solid enough to take the weight of the platform.
Make sure that the lifting capacity of the crane is sufficient to take the weight of the platform.
The turntable must be locked before lifting the platform, e 2-DESCRIPTION: SAFETY COMPONENTS: TURNTABLE LOCKING PIN.
Covers must be closed and locked (if applicable) while the platform is being lifted.
Ü
OCCASIONAL OPERATION
- Mark out a wide safety area around the platform.
- Switch the platform on.
- Place the platform in transport position, e2-DESCRIPTION: OPERATING THE PLATFORM: TRANSPORT/WORKING POSITION.
- Put the turntable, the basket and the jib (150AETJ3D (150AETJC3D)) in neutral position, e2-DESCRIPTION: OPERATING
THE PLATFORM: TRANSPORT/WORKING POSITION.
- Lower the jib completely.
- Lock the turntable, e2-DESCRIPTION: SAFETY COMPONENTS: TURNTABLE LOCKING PIN.
- Turn the platform off. Remove the key.
- Attach a lifting beam to the crane lifting hook.
- Attach lifting slings to the lifting beam and the 4 lifting points on the platform, e2-DESCRIPTION: STICKERS: LIFTING
POINT.
- Slowly lift the crane's lifting hook until the lifting slings are slightly taut.
- If necessary, adjust the lifting slings to prevent damage and keep the platform level.
- Ensure that there is nobody in the safety zone.
- Lift the platform slowly and move it to the arrival zone.
- Slowly lower the platform until the 4 wheels are in contact with the receiving surface.
- Lower the crane's lifting hook until the lifting slings are no longer taut.
- Detach the lifting slings.
3 - 44
150 AETJ
150 AETJ 3D
940 mm
564 mm
1920kg
1920kg
1760 kg
1760 kg
888 mm
1140 mm
1238 mm
963,5 mm
1796mm
1738mm
CG
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L