1-5
- The machines manufactured by MANITOU are designed to be used within the following temperature ranges:
• Minimum temperature: -20°C
• Maximum temperature: +45°C
- Special applications are available as options for particularly cold environments.
The factory fill of lubricants is for average climatic conditions, i.e. between -15°C and +35°C. For operation under
more se
vere climatic conditions, before starting up, the systems should be drained and refilled using lubricants
suited to the ambient temperatures.
- A platform operating in an area without fire extinguishing equipment must be equipped with an individual extinguisher. There are
solutions, consult your dealer.
Your platform may be designed for outdoor use (see: chapter 2 - DESCRIPTION, SPECIFICATIONS pages) under
normal atmospheric conditions and indoor use in suitably aerated and ventilated premises. It is prohibited to use
the platform in areas where there is a risk of fire or which are potentially explosive (e.g. refineries, fuel or gas
depots, stores of flammable products, etc.). For use in these areas, specific equipment is available (ask your
dealer for information).
C - MODIFYING THE PLATFORM
- For your own safety and that of others, you must not change the structure and settings of the various components used in your
platform by yourself (hydraulic pressure, limiter calibration, engine speed, addition of extra equipment, addition of counterweights,
unapproved attachments, alarm systems, etc.). In this event, the manufacturer cannot be held liable.
- Your platform is supplied with standard wheels or all-terrain wheels. It is PROHIBITED to change from one type of wheel to the other:
risk of loss of stability of the platform.
INSTRUCTIONS
- The operator's manual must always be in good condition and kept in the place provided on the platform and in the language used by
the operator.
- You must replace the instructions manual, as well as any plates or stickers, if they are no longer legible or are missing or damaged.
MAINTENANCE
- Maintenance or repairs other than those detailed in chapter: 3 - MAINTENANCE must be carried out by qualified personnel
(consultyour dealer) and under the necessary safety conditions to maintain the health of the operator and any third party.
Your platform must be inspected periodically to ensure that it remains in compliance. The frequency of this
inspection is defined b
y the current legislation applying in the country in which the platform is used.
- Example for France: The manager in charge of the establishment using an access platform must open and maintain a maintenance log
for each machine (order of 2 March 2004).
To Next Page
Loading...
