Manitou A Series Operator's Manual

INTRODUCTION
- Our lift trucks have been designed for easy handling by the operator and maximum ease of maintenance for the
mechanic.
- However, before operating the lift truck, the user should carefully read and understand the various chapters of this
manual which has been provided to solve driving and maintenance problems. By following these instructions the user
will be able to take full advantage of the versatility of this lift truck.
- The operator must familiarize himself with the positions and functions of all the controls and instruments before
operating the lift truck.
LUBRICATION
- Check that all the correct grades of oils and greases that are required are available; see SERVICING SCHEDULE in
SECTION 3 - MAINTENANCE and top up if necessary.
DRY AIR FILTER
- Ensure that the air filter is undamaged and not blocked.
- Tighten the fastening devices if necessary.
COOLING SYSTEM
- Do not start the lift truck without checking the radiator coolant level or if the fan belt is damaged or broken.
HYDRAULIC SYSTEM
- Check by a visual examination that there are no leaks from the hoses, connections and unions. If necessary, tighten or
repair the defective connections.
- Also check that the tank oil level is correct.
BRAKING SYSTEM
- Check by a visual examination that there are no leaks from the hoses, connections and unions. If necessary, tighten or
repair the defective connections.
- Also check the oil level in the tank.
TIRES
- Make sure that the wheel nuts are correctly tightened (See A - DAILY OR EVERY 10 HOURS SERVICE in
SECTION 3 - MAINTENANCE) and that the tire pressures are correct (See CHARACTERISTICS in SECTION 2 -
DESCRIPTION).
FUEL SYSTEM
- Check that all fuel lines are secured.
- If necessary drain the fuel filter and bleed the fuel system of air.
ELECTRICAL CIRCUIT
- Check the level and the density of the electrolyte in the battery (See B - EVERY 50 HOURS SERVICE in SECTION 3 -
MAINTENANCE).
- Check the components of the electrical system, connections, and fastening devices.
IF NECESSARY, CONSULT YOUR DEALER.
1 - 18
BEFORE STARTING UP A NEW LIFT TRUCK
Do not attempt to start a new lift truck before the following checks have been carried out :
IMPORTANT
For operation under average climatic conditions, i.e. between -15 °C and + 35 °C (5°F to 95°F),
correct levels of lubricants in all the circuits are installed at production. For operation under more
severe climatic conditions, before starting up, it is necessary to drain all of the circuits and install
correct levels of lubricants suited to the relevant ambient temperatures. It is the same for the
engine cooling system (Contact your dealer for information, if necessary).
IMPORTANT
Never run the engine with the air filter removed or damaged.
IMPORTANT
Ensure that the recommended oil is used, in order to avoid serious damage to the braking system.
WARNING
FORKLIFT SAFETY
CONTENTS

Manitou A Series Specifications

General

Brand	Manitou
Model	A Series
Category	Front End Loaders
Language	English