Manitou AETJ 43 - Variable Speed Controllers - Diagnostic and Adjustment Tools

ELECTRICITY
118
80
547379EN
80 (08/03/2017)
VARIABLE SPEED CONTROLLERS  DIAGNOSTIC AND ADJUSTMENT TOOLS
CALIBRATOR
CAUTION
The calibrator is also used for:
- The adjustment of the switches. (680.3.4 VARIABLE SPEED CONTROLLERS  CONTROL AND SETTINGS, 5 115)
- Testing the manipulators. (680.3.6 MANIPULATOR  OPERATION AND SETTINGS, 5 133)
- Troubleshooting. (680.5 TROUBLESHOOTING  ELECTRICAL, 5 139)
Description
- Screen (1, 080 - 101).
- Scrolling buttons (2, 080 - 101) (6VARIABLE SPEED CONTROLLERS
 USE OF CALIBRATOR, 5 120)
- Incrementation buttons (3, 080 - 101) (6 VARIABLE SPEED
CONTROLLERS  USE OF CALIBRATOR, 5 120)
- Connection socket (4, 080 - 101).
Fitting
- Open the right-hand turret cover (1, 080 - 102).
- Open the front face of the base control panel (2, 080 - 102).
- Identify the connection cable and attach to it the connection
socket (4, 080 - 101).
- Switch on the access platform.
- Adjust or check the variable speed controllers (6CONFIGURATION
MENUS, 5 121)
DIAGNOSTIC LED
- LED (1, 080 - 103).
- Status of LED and meaning (680.1 ELECTRICAL SCHEMATIC DIAGRAMS,
5 73)
SEVCON
CAN CALIBRATOR
Controller A
Menu
Value - +
Controller B
80 - 101
2
1
3
4
80 - 102
1
2
80 - 103
1