Manitou AETJ 43 - Jib Cylinder - Removal

HYDRAULIC
66
70
547379EN
70 (08/03/2017)
JIB CYLINDER  REMOVAL
- Lift the jib (1, 070  63) to the horizontal position.
- Switch o the power supply.
- Secure the basket with a hoist and a sling (2, 070  63)
3 - 170 kg (375 lbs)
- Place the assembly on a stable surface.
- Open the right-hand turret cover.
- Decompress the jib lifting line (670.3.10 DISTRIBUTOR  REMOVAL,
5 57)
- Remove and plug the hoses connected to the cylinder (1, 070  64).
- Remove the pivot pins from the cylinder, starting with the cylinder
foot pivot pin (2, 070  64) and remove the cylinder:
3 - 15 kg (33 lbs)
NOTE: Before attempting to disassemble the removed cylinder
(6VALVE BLOCKS AND VALVES  REMOVAL, 5 69)
70 - 63
1
2
70 - 64
1
1
2