2-40
5 - EMERGENCY STOP BUTTON
- In the event of danger, it lets you stop the I.C. Engine and thereby cut out all hydraulic
movements.
- Pull the button to disable it before restarting the lift truck.
Be ready for hydraulic movements suddenly stopping when you press this button.
6 - SWITCHES
NOTE: The location of the switches may vary depending on the options.
A - OPTION ELECTRICAL JIB PROVISION ELECTROVALVE AT JIB HEAD
See: 2 - DESCRIPTION: DESCRIPTION AND USE OF THE OPTIONS.
B - OPTIONAL BLUE FRONT AND REAR WORKING LIGHTS
MT 732 Série E-E3
MT 932 Série E-E3
C - WHEEL ALIGNMENT LAMPS
D - WARNING LIGHTS
E - REAR FOG LIGHTS
F - SELF-CLEANING FAN OPTION
See: 2 - DESCRIPTION: DESCRIPTION AND USE OF THE OPTIONS.
G - STEERING SELECTION
H - TRANSMISSION CUT-OFF
The switch selects transmission cut-off to the service brake pedal or the hydraulic controls lever.
NOTE: In all cases transmission cut-off can be activated using the GEAR lever.
- Position 1: With the indicator light on, transmission cut-off is by means of the service brake pedal and the forward/neutral/reverse gear
lever.
- Position 2: Indicator light off, transmission is cut-off from hydraulic controls and forward/neutral/reverse gear selector.
USE OF TRANSMISSION CUT-OFF
Transmission cut-off to brake pedal (position 1).
• When loading.
Transmission cut-off to hydraulic controls lever (position 2).
• When driving.
• For inching and continuous stopping and starting (delicate handling). In order to optimise hydraulic movements, cut off
transmission to the hydraulic controls lever.
• Starting on a slope.
I - REVOLVING LIGHT
J - OPTION FRONT AND REAR WORKING LIGHTS
K - JIB HEAD LIGHT OPTION
L - OPTION
M - OPTION SIDE WINDSCREEN WIPER + ROOF WINDSCREEN WIPER OPTION
I J K L M
A B C
D
E F G H
2
1
To Next Page
Loading...
