Manitou MC 50 POWERSHIFT 3-E2 Series - Page 131

3 - 28
B11 - REAR AXLE
GREASE
M26-4 Série 3-E2 M40-4 Série 3-E2
M30-4 Série 3-E2 M50-4 Série 3-E2
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
- Remove the cover plate 1 (fig. B11/1).
2 - Lubricators of the universal joint: Transmission/Rear axle (3 lubricators) (fig.
B11/2 and B11/3).
3 - Lubricators of the rear wheels reducers pivots (2 lubricators) (fig. B11/4).
4 - Lubricators of the rear axle oscillation pin (2 lubricators) (fig. B11/5).
B11 - REAR AXLE
GREASE
MC 40 POWERSHIFT Série 3-E2 MC 60 POWERSHIFT Série 3-E2
MC 50 POWERSHIFT Série 3-E2 MC 70 POWERSHIFT Série 3-E2
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
1 - Lubricators of the swivel pins (4 lubricators) (fig. B11/1).
2 - Lubricators of the rear axle oscillation pin (2 lubricators) (fig. B11/2).
B11/1
B11/2
B11/5B11/4
3
4
B11/1
B11/2
1
1
2
B11/3
1
2
2
2