2 - 70
10 - ROOF LIGHT
Optional for MC 30 Série 3-E2
11 - ACCELERATOR PEDAL
12 - SERVICE BRAKE PEDAL AND TRANSMISSION CUT-OFF
MC 30 Série 3-E2 M26-2 Série 3-E2 M26-4 Série 3-E2 M40-4 Série 3-E2
M30-2 Série 3-E2 M30-4 Série 3-E2 M50-4 Série 3-E2
The pedal acts on the front wheels by means of a hydraulic brake system enabling the slowing down and stopping of the lift truck.
During clearance travel it enables the transmission to be cut off progressively thus allowing a gradual approach (delicate handling)
with all the I.C. engine power.
12 - SERVICE BRAKE PEDAL AND TRANSMISSION CUT-OFF
MC 40 POWERSHIFT Série 3-E2 MC 60 POWERSHIFT Série 3-E2
MC 50 POWERSHIFT Série 3-E2 MC 70 POWERSHIFT Série 3-E2
SERVICE BRAKE PEDAL
The pedal acts on the front wheels by means of a hydraulic brake system enabling the slowing down and stopping of the lift truck.
TRANSMISSION CUT-OFF PEDAL
This pedal enables the transmission to be cut off progressively thus allowing a gradual approach (delicate handling) with all the
I.C. engine power, and then the service brake pedal to be used to immobilise the lift truck.
13 - DIFFERENTIAL LOCK PUSH BUTTON
Optional for M26-4 Série 3-E2 M40-4 Série 3-E2
M30-4 Série 3-E2 M50-4 Série 3-E2
The differential lock allows the main wheels to turn at the same speed whatever the ground condition. In order to engage it, fully
press the push button.
- Maintain this position during the time required for locking. To interrupt its use, simply remove the foot from the top of the push
button which returns to its initial position automatically.
When the differential lock is engaged, always drive in straight line and in first gear.
To Next Page
Loading...
