31
MEZZER SERVICE MANUAL
mezzer travel change
In order to change the travel of your Mezzer Pro or Expert (27.5 & 29),
rst remove the compression rod assembly. For instructions on how to
do this refer to page 9-13. For travel change on new forks, bath oil may
be preserved by removing stanchion assembly while fork is placed at on
benchtop. Once the rod is removed arrange the travel spacers into the
desired amount of travel using the following charts.
Mezzer Pro and expert Travel Adustment
Increasing Travel: Each spacer pair (Two Halfs) removed Increase travel &
Axel-To-Crown by 10mm
To Next Page
Loading...
