Manitou MH25-4 T BUGGIE 4ST3A - Machine Characteristics

2 - 10
CHARACTERISTICS MSI25 T 4ST3A MSI30 T 4ST3A MSI35 T 4ST3A
NOTE: The specifications given are not binding on the manufacturer and can be modified without prior notification.
DESIGNATION
1.1 Manufacturer MANITOU MANITOU MANITOU
1.2
Model type MSI25 T 4ST3A MSI30 T 4ST3A MSI35 T 4ST3A
1.3
Propulsion: battery, diesel, petrol, LPG, mains Diesel Diesel Diesel
1.4
Type of operation: manual, pedestrian, standing, seated Seated Seated Seated
1.5
Rated capacity/load on forks (basic capacity) Q (t) 2,5 3,0 3,5
1.6
Centre of gravity of load c (mm) 500 500 500
1.8
Distance from the load bearing surface to the centre of the front axle x (mm) 625 630 630
1.9
Wheelbase y (mm) 1800 1800 1800
WEIGHT
2.1 Weight of truck in working order kg 4070 4705 4845
2.2
Front axle load laden kg 5695 6780 7430
2.2.1
Rear axle load laden kg 875 925 915
2.3
Front axle load unladen kg 1630 1900 1730
2.3.1
Rear axle load unladen kg 2440 2805 3115
RUNNING CARRIAGE
3.1 Wheel equipment: : tyre (V), super-elastic (SE), pneumatic (L) LLL
3.2 Size of front wheels “ or mm
275/70 R22.5
148/145M
275/70 R22.5
148/145M
275/70 R22.5
148/145M
3.3
Size of rear wheels “ or mm
7.00X12 14PR
IC40
7.00X12 14PR
IC40
7.00X12 14PR
IC40
3.5 Number of front wheels (x = drive wheel) 2x 2x 2x
3.5.1
Number of rear wheels (x = drive wheel) 222
3.6
Front wheel gauge (middle of wheels) b10 (mm) 1046 1046 1046
3.7
Rear wheel gauge (middle of wheels) b11 (mm) 1102 1102 1102
DIMENSIONS
4.1 Tilt of mast forward α (°) 10 10 10
4.1.1
Tilt of mast backward β (°) 12 12 12
4.2
Height of mast lowered h1 (mm) 2300 2300 2300
4.3
Normal free lift h2 (mm) 130 135 135
4.4
Lift height h3 (mm) 3300 3300 3300
4.5
Height of extended mast h4 (mm) 4131 4193 4193
4.7
Height of standard overhead guard or cab h6 (mm) 2105 2105 2105
4.7
Height of lowered overhead guard (option) h6 *(mm) 1990 1990 1990
4.7
Height of air-conditioned cab (option) h6 **(mm) 2325 2325 2325
4.8
Height of seat h7 (mm) 1025 1025 1025
4.12
Height of towing coupling h10 (mm) 310 310 310
4.19
Total length l1 (mm) 4045 4080 4130
4.20
Length of forks at heel l2 (mm) 2945 2980 3030
4.21
Overall width b1 (mm) 1323 1323 1323
4.22
Section of fork arms s (mm) 40 45 45
4.22.1 Width of fork arms e (mm) 100 100 125
4.22.2 Length of fork arms l (mm) 1100 1100 1100
4.23
Fork carriage to DIN 15173 A/B FEM 2A FEM 3A FEM 3A
4.24
Width of fork carriage (with load back-rest) b3 (mm) 1260 1260 1260
4.31
Ground clearance of mast m1 (mm) 270 270 270
4.32
Ground clearance at centre of wheel-base m2 (mm) 260 260 260
4.33
Aisle width for 1000x1200 pallet widthways Ast (mm) 4525 4560 4595
4.34
Aisle width for 800x1200 pallet lengthways Ast (mm) 4525 4560 4595
4.35
Turning radius Wa (mm) 2545 2580 2590
4.36
Inner turning radius b13 (mm) 150 150 150
647468 (26/11/2018)
M
SI 25/30/35 ... 4ST3A ; MH 25-4 ... 4ST3A