Manitou MH25-4 T BUGGIE 4ST3A - Page 68

2 - 44
17 - 2WD/4WD SWITCH
A - 4WD <-> 2WD SWITCHING
This switch serves to change from 4WD (low speed 14km/h) to 2WD (high speed 24km/h).
A1: LOW SPEED 14km/h (4WD)
- Press the top of the switch. The indicator lamp will switch off.
A2: HIGH SPEED 24km/h (2WD)
- Press the top of the switch. The indicator lamp will switch on.
NOTE: When starting the lift truck, low speed is automatically selected.
CONDITIONS OF USE
FORWARD/REVERSE SELECTOR
Forward Neutral Reverse
(14km/h) 4WD --> 2WD (24km/h)
Permitted (*) Permitted (*) Impossible
(24km/h) 2WD --> 4WD (14km/h)
Permitted (**) Permitted (**) Permitted (**)
(*) After minimum 2 seconds.
(**) With the lift truck turned off, press down on the service brake pedal for 2 seconds before performing the manoeuvre.
P
A2
A1
P
A
647468 (26/11/2018)
M
SI 25/30/35 ... 4ST3A ; MH 25-4 ... 4ST3A