3 - 14
B - EVERY 50 HOURS SERVICE
Carry out the operations described previously as well as the following operations.
B1 – RADIATOR CORE
CHECK - CLEAN
p
In a polluting atmosphere, clean the radiator core every day.
Do not use a water jet or high-pressure steam as this could damage the radiator fins.
- Open the engine bonnet.
- If necessary, clean the suction grid on the engine hood.
- Clean grid 1.
- Using a soft cloth, clean the radiator in order to remove as much dirt as possible.
- Clean the radiator using a compressed air jet aimed in the opposite direction to
the cooling air flow.
- Remove impurities via the panel using handle 2.
-
B2 – TYRE PRESSURE AND WHEEL NUT TORQUES
CHECK
p
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation. Respect the
recommended tyre pressures given.
- Check the condition of the tyres, to detect cuts, protuberances, wear, etc.
- Check the torque load of the wheel nuts. Non-compliance with this instruction can cause damage and rupture to the
wheel bolts and distortion to the wheels.
- Check and restore tyre pressures if necessary (see: 2 - DESCRIPTION: TYRES).
NOTE: There is an OPTIONAL wheel toolkit.
2
1
To Next Page
Loading...
