2-35
- Remove cover 1 to access fuses F3 to F14 and to relays JQ1 to JQ8 and SG.
F3 - Revolving light (15A).
- Working tail light (15A).
F4 - Rear sidelights (20A).
- Front headlights (20A).
F5 - Horn (10A).
F6 - Stop lights (10A).
- Flashing unit (10A).
F7 - Forward/neutral/reverse selector (10A).
- Power governor (10A).
- Engine stop electrovalve (10A).
Only for MI .. D
F9 - Control panel (10A).
F10 - Engine control unit (10A).
F11 - FREE (20A).
F12 - FREE (10A).
F13 - FREE (10A).
F14 - FREE (10A).
JQ1 - Starting relay.
JQ2 - Starter control relay.
JQ3 - Forward drive relay.
JQ4 - Reverse drive relay.
JQ5 - Electrovalve relay.
JQ6 - Sidelight relay.
JQ7 - Front headlight relays.
JQ8 - Ignition relay.
SG - Revolving light relay.
13 - ACCELERATOR PEDAL
14 - SERVICE BRAKE PEDALS AND TRANSMISSION CUT-OFF
Foot pedal A acts on the front wheels by means of a hydraulic brake system, to slow down and
stop the lift truck.
Foot pedal B gradually cuts off the transmission before acting on the front wheels by means of
a hydraulic brake system to slow down and stop the lift truck.
NOTE: In order to stop the lift truck with forward or reverse gear engaged, keep foot pedal A or
B depressed.
Prolonged use of the service brake and transmission cut off pedals causes overheating and can damage the
transmission.
15 - PARKING BRAKE LEVER
- To apply the parking brake, press on the service brake pedal and pull the lever backwards
(position A).
- To loosen the parking brake, press button 1 and push the lever forwards (position B).
NOTE: If the parking brake is released without the presence of the driver, an intermittent audible
signal sounds..
B
A
B
A
F4
JQ8
JQ1
SG
F5
F6
F7
F9
F10
F3
F11
F12
F13
F14
JQ6
JQ7
JQ2
JQ3
JQ4
JQ5
1
1
To Next Page
Loading...
