2-36
16 - HYDRAULIC CONTROLS
Do not attempt to alter the hydraulic system pressure. In the event of suspected malfunction, contact your
dealer. ANY MODIFICATION MAY RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the lift truck.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILTING THE MAST
- The lever B backward for backward tilting.
- The lever B forwards for forward tilting.
OPTION ATTACHMENT
- The lever C forwards or backwards.
OPTION ADDITIONAL ACCESSORY
- Lever D forwards or backwards.
Only for ISO3691 (Hydraulic movements cut-off)
Using the hydraulic controls is only possible if the driver is present and correctly sat on his seat.
17 - STORAGE TRAY
18 - DOCUMENT CLIP
19 - DOCUMENT HOLDER
Ensure that the operator's manual is in its place in the
document holder.
20 - ENGINE COVER OPENING HANDLE
LIFTING THE ENGINE COVER
- If necessary tilt the steering wheel forward to lift the engine cover.
- Lift handle 1, keep in the raised position and gently lift the engine cover until the safety catch
of gas strut 2 locks in place.
LOWERING THE ENGINE COVER
- Release the safety catch 2 and gently lower the engine cover.
- Check that the engine cover is properly closed.
NOTE: On the cab version, open the side doors and the rear sliding widow before lifting the
engine cover.
A B C D
1
2
suivant modèle
To Next Page
Loading...
