SPECIFICATIONS & DESCRIPTION
2.
29647852EN-USM1(B-12/2021)
Designation Unit Value
4.16
Ground clearance at centre of wheelbase m2 (mm)
175
4.17
Width of aisle for pallet 1000x1200 crossways Ast (mm)
3930
4.18
Width of aisle for pallet 800x1200 lengthways Ast (mm)
4130
4.19 Turning radius (position down/up) Wa (mm) 2265
4.20. Inner turning radius
b13 (mm) 145
Performances
Table 13. Performances
Designation Unit Value
5.1 Travelling speed laden
km/h 18
5.1.1
Travelling speed unladen 2WD / 4WD km/h
18.5
5.2
Lifting speed laden m/s
0.6
5.2.1
Lifting speed unladen m/s
0.65
5.3 Lowering speed laden
m/s
0.5
5.3.1 Lowering speed unladen
m/s
0.55
5.4 Nominal towing power laden N 19400
5.4.1 Nominal towing power unladen N 12400
5.5
Gradeability laden %
>20
5.5.1
Gradeability unladen %
>20
5.6 Acceleration time laden
s
-
5.7
Service brake
Hydraulic
Motors
Table 14. Motors
Designation Unit Value
6.1
Engine manufacture / type Kubota V2607-CR-E5B
6.2
Engine power acc. To ISO 1585
KW 37.4
6.3 Rated speed
tr/min
2400
6.4 No. Of cylinders / displacement cm3 4/2615
6.5 Fuel consumption acc. To VDI cycle
L/h
4.55
Miscellaneous
Table 15. Miscellaneous
Designation Unit Value
7.1 Hydraulic pressure for attachments
Bar 160
7.2
Oil volume for attachments L/min
25
7.3 Sound level at driver's ear according to DIN 12053 (overhead
guard / cab)
dB (A) 84
7.4 Towing coupling design / DIN type
- -
7.5
Average weighted acceleration on driver's body (according to
standard NF EN 13059)
m/s² 0.78
To Next Page
Loading...
