MAINTENANCE
4.
87647852EN-USM1(B-12/2021)
2.9.Refit expansion tank filler plug (2).
The engine does not contain any
corrosion resistor and must be filled
during the whole year with a mixture
containing 25% of ethylene glycol-
based antifreeze.
4.11.2 CLEAN FUEL TANK
DANGER
While carrying out these operations, do not smoke or work
near a flame.
DANGER
Never try to carry out a weld or any other operation by
yourself, this could provoke an explosion or a fire.
Place the lift truck on level ground with the
engine stopped.
1. Inspect the parts susceptible to leaks in the fuel
circuit and in the tank.
2. In the event of a leak, contact your dealer.
3. Place a container under drain plug (1) and unscrew
the plug.
4. Remove filling plug (2) in order to ensure that the oil
is drained properly.
5. Rinse out with ten litres of clean diesel through the
filler port.
6. Refit and tighten the drain plug (tightening torque 29
to 39N.m).
7. Fill the fuel tank with clean diesel filtered through
the filling port.
8. Refit the filler plug.
9. If necessary, bleed the fuel system.
4.11.3 DRAIN DIFFERENTIAL OIL
Place the lift truck on level ground with the
engine stopped and the d oil still warm.
Dispose of the drain oil in an ecological
manner.
1. Place a container under drain plug (1) and unscrew
the plug.
To Next Page
Loading...
