Manitou MLA 628 -120 LSU 3-E2 Series

To Next Page

To Previous Page

3 - 373 - 37

- Remove the safety support and lower the lift truck with the jack.- Remove the safety support and lower the lift truck with the jack.

- Tighten the wheel nuts with a torque wrench (see : 3 - MAINTENANCE- Tighten the wheel nuts with a torque wrench (see : 3 - MAINTENANCE : A - DAIL: A - DAILY OR EVERYY OR EVERY

10 HOURS SERVICE for tightening 10 HOURS SERVICE for tightening torque).torque).

G3 - LG3 - LIIFFTT TRTRUCUCKK

TOTOWW

Do not tow the lift truck at

Do not tow the lift truck at more than 25 km/h.more than 25 km/h.

- Put the forward/reverse lever and the gear shift in neutral (as model of lift truck).- Put the forward/reverse lever and the gear shift in neutral (as model of lift truck).

- Release the parking brake.- Release the parking brake.

- Put the warning lights on.- Put the warning lights on.

- If the I.C. engine is not running there will be no steering or braking assistance. Operate the steering and pedal slowly avoiding- If the I.C. engine is not running there will be no steering or braking assistance. Operate the steering and pedal slowly avoiding

sudden abrupt movements.sudden abrupt movements.

G4 - LG4 - LIIFFTT TRTRUCUCKK

SLINGSLING

- Take into account the position of the lift truck gravity center for lift-- Take into account the position of the lift truck gravity center for lift-

ing (fig. G4/1).ing (fig. G4/1).

A A == 5588..3 3 iinn.. B B == 4400..2 2 iinn..

- Place the hooks in the fastening points provided (fig. G4/2 and- Place the hooks in the fastening points provided (fig. G4/2 and

G4/3).G4/3).

GG44//22 GG44//33

A BB

G4/1G4/1

Do not tow the lift truck at more than 15 mph.Do not tow the lift truck at more than 15 mph.

IMPORTANTIMPORTANT



G5 - LG5 - LIIFFTT TTRRUUCCKK ONON AA PPLLAATTFFOORRMM

TRANSPORTTRANSPORT

Ensure that the safety instructions connected to the platform are respected before the loading

of the lift truck and that the driver of the means of transport is informed about the dimensionsof the lift truck and that the driver of the means of transport is informed about the dimensions

and the weight of the and the weight of the lift truck (see : 2 - lift truck (see : 2 - DESCRIPTIONDESCRIPTION : CHAR: CHARACTERACTERISTICISTICS).S).

Ensure that the platform has got dimensions and a load capacity sufficient for transporting theEnsure that the platform has got dimensions and a load capacity sufficient for transporting the

lift truck. Check also the pressure on the contact surface allowable for the platform in con-lift truck. Check also the pressure on the contact surface allowable for the platform in con-

nection with the lift truck.nection with the lift truck.

For lift trucks equipped with a turbo-charged I.C. engine, block off the exhaust outlet to avoidFor lift trucks equipped with a turbo-charged I.C. engine, block off the exhaust outlet to avoid

rotation of the turbo shaft without lubrication when transporting the vehicle.rotation of the turbo shaft without lubrication when transporting the vehicle.

LOAD THE LIFT TRUCKLOAD THE LIFT TRUCK

- Block the wheels of the platform.- Block the wheels of the platform.

- Fix - Fix the loading ramps so that you obtain an angle as lithe loading ramps so that you obtain an angle as little as possible to lift the lift truck.ttle as possible to lift the lift truck.

- Load the lift truck parallel to the platform.- Load the lift truck parallel to the platform.

- Park the lift truck (see : 1 - OPERATING AND SAFETY INSTR- Park the lift truck (see : 1 - OPERATING AND SAFETY INSTRUCTIONSUCTIONS : DRIVING INSTRUC-: DRIVING INSTRUC-

TIONS UNLADEN AND LADEN).TIONS UNLADEN AND LADEN).

STOW THE LIFT TRUCKSTOW THE LIFT TRUCK

G5/1G5/1

G5/2G5/2



For lift trucks equipped with a turbo-charged I.C. engine, block off theFor lift trucks equipped with a turbo-charged I.C. engine, block off the

exhaust outlet to avoid rotation of the turbo shaft without lubrication whenexhaust outlet to avoid rotation of the turbo shaft without lubrication when

transporting the vehicle.transporting the vehicle.

IMPORTANTIMPORTANT

Ensure that the safety instructions for the Ensure that the safety instructions for the platform are followed before load-platform are followed before load-

ing the lift truck and that the driver of transport is ing the lift truck and that the driver of transport is informed about the dimen-informed about the dimen-

sions and weight of the lift truck.sions and weight of the lift truck.

WARNINGWARNING