Manitou MLA 628 -120 LSU 3-E2 Series - Picking Up the Attachments

4 - 54 - 5
the attachment having less capacity than the lift truck, never exceed
the attachment having less capacity than the lift truck, never exceed this limit.this limit.
Depending on their size, certain attachments (when the boom is lowered and/or retracted, or the tilt is activated) may come into contact withDepending on their size, certain attachments (when the boom is lowered and/or retracted, or the tilt is activated) may come into contact with
the front tires the front tires and cause damage and cause damage to them. TO AVOID TIRE to them. TO AVOID TIRE DAMAGE, EXTEND THE TELESCOPE TO A SUFFICIENT DISTANCE TO AVOID DAMAGINGDAMAGE, EXTEND THE TELESCOPE TO A SUFFICIENT DISTANCE TO AVOID DAMAGING
THE TIRES!THE TIRES!
WARNINGWARNING

PICKING UP THE ATTACHMENTSPICKING UP THE ATTACHMENTS
A - AA - ATTTTACACHMHMENENTT WIWITHTHOUOUTT HYHYDRDRAUAULILICSCS ANANDD HAHANDND LOLOCKCKININGG DEDEVIVICECE
TAKING UP AN ATTACHMENTTAKING UP AN ATTACHMENT
- Ensure that the attachment is oriented for locking to the carriage. If it is not correctly- Ensure that the attachment is oriented for locking to the carriage. If it is not correctly
oriented,oriented, take the necessary precautions in ortake the necessary precautions in order to move it safelyder to move it safely..
- Check that the locking pin and the clip are in position in the bracket (fig. A).- Check that the locking pin and the clip are in position in the bracket (fig. A).
- Park the lift truck with the boom lowere- Park the lift truck with the boom lowered in front of and pard in front of and parallel to the attachment,allel to the attachment, tilt thetilt the
carriage forwards (fig. B).carriage forwards (fig. B).
- Bring the - Bring the carriage under the carriage under the locking tube of locking tube of the attachment,the attachment, slightly lift the slightly lift the boom,boom, inclineincline
the carriage backwards in order to position the attachment (fig. C).the carriage backwards in order to position the attachment (fig. C).
- Lift the attachment off the ground to facilitate locking.- Lift the attachment off the ground to facilitate locking.
HAND LOCKINGHAND LOCKING
- Take the locking pin and the clip on the bracket (fig. A) and lock the attachment (fig. D).- Take the locking pin and the clip on the bracket (fig. A) and lock the attachment (fig. D).
Do not forget to install the clip.Do not forget to install the clip.
HAND RELEASINGHAND RELEASING
- Proceed in the reverse order of paragraph HAND LOCKING while making sure you install- Proceed in the reverse order of paragraph HAND LOCKING while making sure you install
AA
BB
CONTENTSCONTENTS
https://www.forkliftpdfmanuals.com/