Manitou MLT625-75 H S1-E3 - B - EVERY 50 HOURS SERVICE

3-13-144

B - EVERY 50 HOURS SERVICE
B - EVERY 50 HOURS SERVICE
Carry out the operations described previously as well as Carry out the operations described previously as well as the following operations.the following operations.
B1 - DRY AIR FILTER CARTRIDGEB1 - DRY AIR FILTER CARTRIDGE
CHECK - CLEANCHECK - CLEAN
In case of use in In case of use in a heavily dust laden atmosphere, there a heavily dust laden atmosphere, there are pre-filtration carare pre-filtration cartridges (see: 3 - MAINTENANCE: FILtridges (see: 3 - MAINTENANCE: FILTERS CARTRIDGESTERS CARTRIDGES
AND BELAND BELTS). Also, the checking and cleaning frequency of the carTS). Also, the checking and cleaning frequency of the cartridge must be reduced.tridge must be reduced.
If the clogging indicator light comes on, this operation must be carried out as quickly as possible (1 hour maximum). The carIf the clogging indicator light comes on, this operation must be carried out as quickly as possible (1 hour maximum). The cartridge must not be cleanedtridge must not be cleaned
more than seven times, after which it must more than seven times, after which it must be changed. Never use the lift truck without an be changed. Never use the lift truck without an air filter or with a air filter or with a damaged air filterdamaged air filter..
- For the - For the disassembly and reassembly of the cardisassembly and reassembly of the cartridge, see: 3 - tridge, see: 3 - MAINTENANCE: D3 - DRY AIR FILTEMAINTENANCE: D3 - DRY AIR FILTER CARTRIDGE.R CARTRIDGE.
-- Clean the filtClean the filter cartridge using a compressed air jet er cartridge using a compressed air jet (max. pressure 3 ba(max. pressure 3 barr(44 psi(44 psi) directed from the top to the bottom and from the inside) directed from the top to the bottom and from the inside
towards the outside at a minimum distance of 30 mmtowards the outside at a minimum distance of 30 mm (1.18 in.)(1.18 in.)from the cartridge wall.from the cartridge wall.
Cleaning is completed when there is no more dust onCleaning is completed when there is no more dust on the carthe cartridgetridge
https://www.forkliftpdfmanuals.com/