F - EVERY 2000 HOURS OF SERVICEF - EVERY 2000 HOURS OF SERVICE
Carry out the operations described previously as well as Carry out the operations described previously as well as the following operations.the following operations.
F1 - COOLING LIQUIDF1 - COOLING LIQUID
DRAINDRAIN
These operations are to be carried out if necessary or every two years at the beginning ofThese operations are to be carried out if necessary or every two years at the beginning of
winter. Placwinter. Place the lift truck on e the lift truck on level ground with the I.C. engine stopped and cold.level ground with the I.C. engine stopped and cold.
DRAINING THE LIQUIDDRAINING THE LIQUID
-- Place a container Place a container under drain plug 1 (funder drain plug 1 (fig. F1/1) and unscig. F1/1) and unscrew the plug.rew the plug.
-- Open the I.Open the I.C. enginC. engine bonnete bonnet..
-- Remove expansion paRemove expansion pan filler plug 2 (n filler plug 2 (fig. F1/2).fig. F1/2).
-- Let the cooling circuit dLet the cooling circuit drain entirely while erain entirely while ensuring that the ports do not get cloggednsuring that the ports do not get clogged
F1/1F1/1
11