Manitou MT 1135 ST3B - Windscreen Washer Liquid Level; Cab Ventilation Filters; Condenser Core

3 - 19
B7 – WINDSCREEN WASHER LIQUID LEVEL
CHECK
- Visually check the level in tank 1.
- If necessary add windscreen washer liquid (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL).
- Remove cap 2.
- Add windscreen washer liquid through filler port 3.
- Refit the cap.
B8 – CAB VENTILATION FILTERS
CLEAN
EXTERNAL CAB VENTILATION FILTER
- Lift out cab ventilation filter 1.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary
(see:3- MAINTENANCE: FILTERS CARTRIDGES
AND BELTS).
- Reinstall the filter.
- Refit the protective casing 2.
INTERNAL CAB VENTILATION FILTER
- Remove the protective grid 3.
- Lift out cab ventilation filter 4
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary
(see:3- MAINTENANCE: FILTERS CARTRIDGES
AND BELTS).
- Reinstall the filter.
- Refit the protective grid 3.
B9 – CONDENSER CORE (OPTION AIR CONDITIONING)
CHECK - CLEAN

IMPORTANT

In a polluting atmosphere, clean the radiator core every day.
Do not use a water jet or high-pressure steam as this could damage the condenser fins.
- Visually check whether the condenser is clean and clean it if necessary.
- Clean the condenser using a compressed air jet aimed in the same direction as
the air flow.
- Clean with the fans running for best results.
1
2
3
1
2
3
4
647104 (13/06/2016) MT 835 / 1135 / 1335 ST3B