Manitou MT 1135 ST3B - Front and Rear Axle Differential Oil Level; Front and Rear Wheel Reduction Gear Oil Level

3 - 21
C3 – FRONT AND REAR AXLE DIFFERENTIAL OIL LEVEL
CHECK
Place the lift truck on level ground with the engine stopped.
- Remove the level plug 1; the oil should be flush with the edge of the hole.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) through the
filler port 2.
- Refit and tighten the level plug 1 (tightening torque 34 to 49 N.m).
C4 – FRONT AND REAR WHEEL REDUCTION GEAR OIL LEVEL
CHECK
Place the lift truck on level ground with the engine stopped.
- Check the level on each wheel reduction gear.
- Place level plug 1 in a horizontal position.
- Remove the level plug; the oil should be flush with the edge of the opening.
- If necessary, add oil (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL) through the
same opening.
- Refit and tighten the level plug (tightening torque 34 to 49 N.m).
1
2
1
647104 (13/06/2016) MT 835 / 1135 / 1335 ST3B