2 - 38
6A - DRIVER PRESENCE
The driver's presence is validated when the operator is correctly seated and the cab door is closed.
- It is only from that moment that the lift truck is operational; the operator can perform hydraulic movements and move
the lift truck.
6B - INSTRUMENT CONTROL PANEL
A
B
B1
C
D
E
E
F
G
H
H1
A - REV COUNTER
B - FUEL LEVEL
When the yellow warning light B1 comes on it means that you are in reserve and that your running time is limited.
6 - MAN-MACHINE INTERFACE (MMI)
• 6A - DRIVER PRESENCE
• 6B - INSTRUMENT CONTROL PANEL
• 6C - PANEL FOR BUTTONS AND KEYBOARD
• 6D - SCREEN DISPLAY
UPDATED: In order to gain maximum advantage from the Man-Machine Interface
of your lift truck, contact your dealer to receive the most recent available
version of the software.
6A 6D
6B
6C
5 - BATTERY CUT OFF
For quickly disconnecting the battery when working on the electric circuit or when
soldering, for example.
IMPORTANT
Operate the battery cut-out no less than 30 seconds after having switched off the ignition with the ignition key.
4 - EMERGENCY STOP BUTTON
In the event of danger, it lets you stop the engine and thereby cut out all hydraulic
movements.
IMPORTANT
Warning, hydraulic movements suddenly stop when using this button.
Warning, when driving, the lift truck will be brought to a sudden stop if the parking brake is actuated.
If possible, stop the lift truck before using the emergency stop button.
- Pull the button to disable it before restarting the lift truck.
4
5
647104 (13/06/2016)
MT 835 / 1135 / 1335 ST3B
To Next Page
Loading...