2 - 66
DESCRIPTION AND USE OF THE OPTIONS
1 - LICENSE PLATE LIGHT
2 - MODCLE ANTI-START SYSTEM
3 - BOOM ELECTRICAL PREDISPOSITION
4 - QUICK-RELEASE COUPLER ON ATTACHMENT CIRCUIT
5 - ANGULAR SECTOR ON BOOM
6 - EXTERIOR DRAIN-BACK
7 - ATTACHMENT HYDRAULIC LOCKING
8 - TELESCOPE HEAD ELECTROVALVE
9 - TELESCOPE HEAD ELECTROVALVE + HYDRAULIC ATTACHMENT LOCKING
10 - SINGLE SIDE-SHIFT CARRIAGE (TSDL)
11 - SINGLE OR DUAL EFFECT REAR HYDRAULIC CONTROL PREDISPOSITION
12 - LIFTING RING ON SINGLE CARRIAGE
1 - LICENSE PLATE LIGHT
2 - MODCLE ANTI-START SYSTEM
OPERATION
- Switch on lift truck ignition, red led 1 will flash.
- Apply key 2 to its base 3, and withdraw the moment the system emits a continuous
beep, and led 1 turns green.
- Start the lift truck within the next 20 seconds; otherwise the anti-theft system will
be reactivated and red led 1 will flash.
NOTE: You can restart the lift truck within 20 seconds of stopping it: after this time,
the anti-start system reacts and red LED C flashes.
647104 (13/06/2016)
MT 835 / 1135 / 1335 ST3B
To Next Page
Loading...