Manitou MT 1335 ST3B - LUBRICANTS AND FUEL

3 - 6
LUBRICANTS AND FUEL

IMPORTANT

USE THE RECOMMENDED LUBRICANTS AND FUEL:
- For topping up, oils may not be miscible.
- For oil changes, MANITOU oils are perfectly appropriate.
DIAGNOSTIC ANALYSIS OF OILS
If a service or maintenance contract has been organized with the dealer, a diagnostic analysis of engine, transmission andaxle
oils may be requested depending on the rate of use.
(*) REQUIRED FUEL SPECIFICATION
Use a high-quality fuel to obtain optimal performance of the engine.
• EN590 diesel fuel (sulfur content < 10 ppm)
• ASTM D975 diesel fuel (sulfur content < 15 ppm)
RECOMMENDATION
I.C. ENGINE
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
0W20
0W30
0W40
5W30
5W40
10W30
I.C. ENGINE 7,5 Liters MANITOU EVOLOGY OIL 10W40 API CJ4
15W40
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
COOLING CIRCUIT 17 Liters COOLING LIQUID -35°C
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
FUEL TANK 120 Liters GNR HP DIESEL *
TRANSMISSION
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
GEAR BOX 21,1 Liters MANITOU AUTOMATIC TRANSMISSION OIL DX IIIG
BOOM
PARTS TO BE LUBRICATED RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
BOOM PADS MANITOU BLACK MULTI-USE LUBRICANT
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
GREASING THE BOOM MANITOU BLUE MULTI-USE LUBRICANT
HYDRAULIC
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
ISO VG 100
ISO VG 68
HYDRAULIC OIL TANK 115 Liters MANITOU ISO VG 46 HYDRAULIC OIL
ISO VG 37
ISO VG
32
BRAKE
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
BRAKING CIRCUIT 0,75 Liter MANITOU MINERAL BRAKE FLUID
CAB
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
WINDSCREEN WASHER TANK 8 Liters WINDSCREEN WASHER LIQUID
647104 (13/06/2016) MT 835 / 1135 / 1335 ST3B