Manitou MT 1335 ST3B - Function Files; Hydraulic Controls

2 - 56
16 - FUNCTION FILES
These files contain the description of the hydraulic controls and the load charts for the attachments used on the lift truck.
17 - HYDRAULIC CONTROLS
Authorization for using the hydraulic controls is given by the validation of the driver’s presence (see: 2 - DESCRIPTION: 6 -
MAN-MACHINE INTERFACE (MMI)) and if the conditions for using the hydraulic control are followed.

IMPORTANT

Do not attempt to alter the hydraulic system pressure. In the event of suspected malfunction, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL
AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the lift truck.
MT 835 ST3B
• A - Lifting and tilting control lever.
• B - Telescoping control button.
• C - Attachment control button.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILT OF CARRIAGE
- The lever A to the left for reverse tilt.
- The lever A to the right for forward tilt.
TELESCOPING
- Button B forwards for extending.
- Button B backwards for retracting.
ATTACHMENT
- Button C forwards or backwards.
A
B
C
N°309499
647104 (13/06/2016) MT 835 / 1135 / 1335 ST3B