2 - 37
GEAR BOX OIL TEMPERATURE LIGHT
This light comes on when the temperature of the gear box oil is abnormally high. In this case, place the forward/reverse selector
in neutral and leave the engine to idle for a few minutes. If the light remains on, stop the forklift truck and contact your dealer.
NOTE: Abnormal heating of the oil may be linked to incorrect use of the gear box ratios (see: 2 - DESCRIPTION: 20 - GEAR
LEVER).
PARKING BRAKE INDICATOR LAMP
This indicator lamp comes on when the parking brake is applied.
A flashing light indicates a fault (see: 2 - DESCRIPTION: 6D - SCREEN DISPLAY: MENU SCREEN).
HYDRAULIC MOVEMENT NEUTRALISATION LIGHT
The light comes on when the hydraulic controls are neutralized and when a prohibited hydraulic movement is requested.
NOTE: When driving on the road, it is strongly recommended that you lock all hydraulic movements.
6C - BUTTONS AND KEYBOARD PANEL
A beep is sounded each time one of the buttons is pressed.
”BUCKET” MODE (NOT USED)
“INCHING” MODE PROGRESSIVE TRANSMISSION (NOT USED)
“SUSPENDED LOAD" MODE
See: 2 - DESCRIPTION: 7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE.
647563 (22/08/2017)
MT 1435/1440/1840 EASY 75D ST3B S1
To Next Page
Loading...
Need help?
General
