Manitou MT 625 H 75K ST5 S1 - LUBRICATE General Lubrication

3 - 18
1
1
2
3
4
6
8
9
5
7
10
5
10
10
10
LUBRICATE General lubrication
To be carried out weekly, if the lift truck has been operated for less than50 hours during the week.
t
IMPORTANT
t
In the event of prolonged use in an extremely dusty or oxidising atmosphere, reduce this interval to10 hours of service or every day.
Clean, then lubricate the following points with grease (eLUBRICANTS AND FUEL) and remove the surplus.
BOOM
1 - Lubricators of the boom pin (2 lubricators).
2 - Lubricator of the carriage pin (1 lubricator).
3 - Lubricator of the tilting cylinder foot pin (1 lubricator).
4 - Lubricator of the tilting cylinder head pin (1 lubricator).
5 - Lubricator of the lifting cylinder foot pin (1 lubricator).
6 - Lubricator of the lifting cylinder head pin (1 lubricator).
7 - Lubricator of the compensating cylinder foot pin (1 lubricator).
8 - Lubricator of the compensating cylinder head pin (1 lubricator).
FRONT AND REAR WHEEL REDUCTION GEAR PIVOTS
9 - Lubricators of the wheel reduction gear pivot pins (8 lubricators).
REAR AXLE OSCILLATION
10 - Rear axle oscillation lubricators (2 lubricators).
OPTION
647732 (31/10/2019) MT 625 H 75K ST5 S1 / MT 625 H 75K COMFORT ST5 S1