Manitou MT 625 H 75K ST5 S1 - Hydraulic Controls

2 - 32
A1
A2
B2
B1
C1
C2
D1
D2
E
17 - HYDRAULIC CONTROLS
t
IMPORTANT
t
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of suspected malfunction, contact your dealer. ANY
ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls gently without jerking, to avoid incidents caused by shaking the lift truck.
NOTE: When driving on the road, it is highly recommended (mandatory in Germany) that all the hydraulic movements
are cut off (eSWITCHES).
HYDRAULIC CONTROLS ACTIVATION
To avoid inadvertent operation of the hydraulic lifting, tilting, telescoping and attachment controls, a safety device is added
to the lift truck (SECOND FIT) .
FIRST FIT: NO HYDRAULIC CONTROLS ACTIVATION
-Place your hand on the lever and perform the hydraulic movement.
SECOND FIT:
HYDRAULIC CONTROLS ACTIVATION
-Place your hand on the lever, activate the hydraulic controls by contact on the capacitive
sensor and perform the hydraulic movement.
-Hydraulic controls activation is maintained on a timer while the lift truck is being used.
-If necessary, reactivate the hydraulic controls.
A1-LIFTING
A2-LOWERING
B1-EXCAVATION
B2-DUMP
C1-TELESCOPE EXTENSION
C2-TELESCOPE RETRACTION
D1-ATTACHMENT
D2-ATTACHMENT
E-BOOM HEAD ELECTROVALVE (OPTION)
MT625HCOMFORT75KST5
eDESCRIPTION AND USE OF THE OPTIONS
647732 (31/10/2019) MT 625 H 75K ST5 S1 / MT 625 H 75K COMFORT ST5 S1