Manitou MT 625 H 75K ST5 S1 - Page 71

2 - 33
+
-
N°52509004
N°286989
ADJUSTMENT OF ATTACHMENT HYDRAULIC FLOW RATE
- Switch on lift truck ignition.
- Select the attachment circuit hydraulic flow screen
%
with the scroll
button
. In turn the screen displays the hydraulic flow stored in the memory
of circuit B (without "-" sign) and of circuit A (with "-" sign).
- Press the
button for two seconds, the screen will appear on the
lower screen display.
- Turn button C forwards to select a hydraulic flow for circuit B of between10%
and100%.
- Hold button C at the desired flow and confirm with the
button.
- The screen
appears on the lower screen display.
- Turn button C backwards to select a hydraulic flow for circuit A between -10%
and -100%.
- Hold button C at the desired flow and confirm with the
button.
- The hour meter screen
appears on the lower display screen, confirming
that adjustment is completed.
SPEED SELECTION
Speeds can be selected while driving.
Buttons1 and2 are used to select a speed.
• HIGH SPEED: For driving on the road. Press button1, the high speed indicator
lamp comes on
.
• SLOW SPPED: For handling operations. Press button2, the slow speed indicator
lamp comes on
.
+
-
N°52509004
2
1
647732 (31/10/2019) MT 625 H 75K ST5 S1 / MT 625 H 75K COMFORT ST5 S1