Manitou MT 625 H 75K ST5 S1 - Steering Selection

2 - 35
A2
A1
B3
B2
B1
B
21 - STEERING SELECTION
A-GREEN WHEEL ALIGNMENT INDICATOR LAMPS
t
IMPORTANT
t
Before selecting one of the three steering possibilities, align the4 wheels in relation to the lift truck axis.
Never change the steering mode whilst driving.
These green indicator lamps come on to indicate the alignment of the wheels in relation
to the lift truck. The A1 indicator lamp for the front wheels and the A2 indicator lamp
for the rear wheels.
B-STEERING SELECTION LEVER
• B1- Front drive wheels (road traffic).
• B2- Front and rear drive wheels in the opposite direction (small turning circle).
• B3- Front and rear drive wheels in the same direction (crabwise movement).
CHECKING WHEEL ALIGNMENT
t
IMPORTANT
t
Before travelling on a public road, it is necessary to check the rear wheel alignment and to travel on front drive wheels.
Checking the rear wheel alignment must be performed regularly using the green indicator lamps when the forklift
truck is in motion.
In case of technical faults, consult your dealer.
- Place the steering selection lever B in position B2 (short turning circle).
- Turn the steering wheel and bring the rear wheels into alignment until the A2
indicator lamp comes on.
- Place the steering selection lever B in position B1 (road traffic).
- Turn the steering wheel and align the front wheels until indicator lamp A1 lights up.
647732 (31/10/2019) MT 625 H 75K ST5 S1 / MT 625 H 75K COMFORT ST5 S1