Manitou MT 625 H 75K ST5 S1 - A-B-C-D-E Marking on Boom; Angular Sector on Boom; Boom Safety Wedge; Fuel Tank

2 - 39
1
A B C
40 - BOOM SAFETY WEDGE
t
IMPORTANT
t
Only use the wedge supplied with the lift truck.
The lift truck is equipped with a boom safety wedge which must be installed on the
rod of the lifting cylinder when working beneath the boom (e1-OPERATING AND
SAFETY INSTRUCTIONS).
41 - FUEL TANK
As far as possible, keep the fuel tank well filled in order to minimise condensation due
to the atmospheric conditions.
t
IMPORTANT
t
Never smoke or approach with a flame during filling operations or when the tank is open.
Never refill while engine is running.
- If necessary, add diesel (e3-MAINTENANCE: LUBRICANTS AND FUEL).
- Remove cap1.
- Fill the fuel tank with clean diesel filtered through the filler port.
- Refit the cap.
- Visually check that there is no leakage in the tank and pipes.
42 - "A-B-C-D-E" MARKING ON BOOM
The marking indicates the outreach of the boom and therefore improves reading of
the load charts.
43 - ANGULAR SECTOR ON BOOM
The angular sector displays the boom angle, and thus improves the reading of the load
charts.
647732 (31/10/2019) MT 625 H 75K ST5 S1 / MT 625 H 75K COMFORT ST5 S1