Manitou MT 728 - Page 105

B13 - STABILISERS
GREASE
MT 1030 S Série 3-E2
MT 1030 S Turbo Série 3-E2
Clean and lubricate the following points with grease (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL) and remove the surplus of grease.
1 - Lubricators on stabiliser actuator shafts (4 lubricators) (fig. B13/1).
2 - Lubricators on stabiliser actuator shafts (4 lubricators) (fig. B13/2 and
B13/3).
B13/1
B13/3B13/2
1
1
2
2
3 - 19