DESCRIPTION (option)
21 - DRIVER'S SEAT
DESIGNED FOR MAXIMUM COMFORT, THIS SEAT CAN BE ADJUSTED AS FOLLOWS.
WEIGHT ADJUSTMENT
- Adjust the weight when the driver is sitting on the seat.
- Pull the weight adjustment lever1 fully out.
- Move the weight adjustment lever1 upwards to increase the weight or downwards
to reduce it.
- There are ten possible positions between the min and max weights. Before each
run, return the lever to the central position. The max. or min. position is indicated
by a freely travelling lever.
- The driver's weight is correctly adjusted when the arrow is in the centre of indicator 2.
- After completing the weight adjustment, fully lower the lever1.
NB: To avoid any health problems, it is recommended that the weight setting is checked and adjusted before starting the
machine.
LONGITUDINAL ADJUSTMENT
IMPORTANT
Activate the lever from the hollow in it and not by putting your hand underneath to prevent the risk of crushing.
- Adjust the locking lever until you reach the position required. This then locks and
the seat will not shift into another position.
LUMBAR ADJUSTMENT
This increases the comfort of the seat and the driver’s freedom of movement.
- Turn the handle to1 to adjust the height and depth of the lumbar support of the
upper part of the backrest.
- Turn the handle to2 to adjust the height and depth of the lumbar support of the
lower part of the backrest.
BACKREST ANGLE ADJUSTMENT
IMPORTANT
If you do not support the backrest when making adjustments, it will tilt forwards.
A moving backrest increases the risk of an accident!
- Support the backrest, pull the lever and position the backrest to find the desired
position.
MAINTENANCE
Dirt may adversely affect the correct functioning of the seat. This is why it is important to make sure that it is clean.
- First test the resistance of the coating on a small hidden area using everyday cleaner.
NB: As an option, there is a protective cover for transport.
2-28
647737 M1 (A102020)
TMM ... ST5 S1
To Next Page
Loading...
