Manitou TMM 20 K ST5 S1 - Extender Positioner; Manual Folding Load Carrier

31 - EXTENDER POSITIONER
The fork positioner is used to adapt the distance between the forks to different pallet
sizes from the driver's cab.

IMPORTANT

Attachment control lever F may include an electric switch.
Check your configuration before use.
FORK CLOSING
- Press and hold the switch (depending on configuration) and pull lever F backwards
to bring the forks closer together.
FORK OPENING
- Press and hold the switch (depending on configuration) and push lever F forwards
to move the forks apart.
32 - MANUAL FOLDING LOAD CARRIER
TMM..4W
The load carrier allows a load to be set down on the folding arms in order to stabilise it
while the lift truck is moving.

IMPORTANT

For coupling the lift truck to the rear of the lorry or trailer,
the load carrying arms must be lifted (position B) and locked with the pins 1.
LOWERING THE LOAD CARRIER ARMS (position A)
- Unlock the load carrier arms.
- Manually lower the load carrier arms.
LIFTING THE LOAD CARRIER ARMS (position B)
- Manually raise the load carrier arms.
- Lock the load carrier arms in position.
2-31
F
A
A
B
B
1
647737 M1 (A102020) TMM ... ST5 S1