34 - LORRY SOCKET
15-pin adapter 24N/24S.
35 - RIGHT-HAND STRAP
This option is used when the lift truck is installed at the rear of the lorry or trailer. It is
used to hold the lift truck on the trailer. The right-hand strap is additional to the left-hand
strap and they are only provided for a telescopic support coupling system.
33 - HYDRAULIC FOLDING LOAD CARRIER
TMM..4W
The load carrier allows a load to be set down on the folding arms in order to stabilise it
while the lift truck is moving.
IMPORTANT
For coupling the lift truck to the rear of the lorry or trailer,
the load carrying arms must be lifted (position B).
LOWERING THE LOAD CARRIER ARMS (position A)
- Press and hold the switch 1 and push lever D forwards to lower the load carrier arms.
LIFTING THE LOAD CARRIER ARMS (position B)
- Press and hold the switch 1 and pull lever D backwards to lift the load carrier arms.
2-32
D
1
A
A
B
B
647737 M1 (A102020)
TMM ... ST5 S1
To Next Page
Loading...
