CLEAN Cyclonic pre-filter (option)
The cleaning interval is given as a guide, however the pre-filter must be emptied and
cleaned as soon as impurities reach the MAX level on the tank.
IMPORTANT
When cleaning, take care not to let impurities into the dry air filter.
- Loosen nut1 remove cover2 and empty the tank.
- Clean the pre-filter unit with a clean dry cloth and reassemble the unit.
CHECK Fuel level
As far as possible, keep the fuel tank well filled in order to minimise condensation due
to the atmospheric conditions.
IMPORTANT
Never smoke or approach with a flame during filling operations or when the tank is open.
Never refill while engine is running.
Place the lift truck on level ground.
- Check the fuel gauge on the instrument panel.
- If necessary, add diesel (
LUBRICANTS AND FUEL).
- Open the engine cover.
- Remove the cap1.
- Fill the fuel tank with clean diesel filtered through the filler port 2.
- Put the cap 1 back.
- Visually check that there is no leakage in the tank and pipes.
3 - 13
1
2
2
1
647737 M1 (A102020)
TMM ... ST5 S1