Manitou TMM 20 K ST5 S1 - Lift Truck; Sling; Transport

SLING Lift truck
- Take into account the position of the lift truck centre of gravity for lifting.
- Place the hooks in the fastening points 1 provided.
TRANSPORT Lift truck

IMPORTANT

Before loading the lift truck:
- Ensure that the platform safety instructions are correctly applied.
- Make sure that the transport company is aware of the dimensions and weight of the lift truck (

2-DESCRIPTION:
SPECIFICATIONS).
- Ensure that the platform is of sufficient size and load capacity for transporting the lift truck.
- Check also the allowable ground contact pressure of the platform relative to the lift truck.
LOADING THE LIFT TRUCK

IMPORTANT

The lift truck must be loaded onto the platform in reverse gear and
unloaded in forward gear.
- Block the platform's wheels using shims.
- Attach the loading ramps to the platform in such a way as to give the shallowest
possible ramp angle for the lift truck.
- Load the lift truck parallel to the platform.
- Stop the lift truck (1-OPERATING AND SAFETY INSTRUCTIONS: OPERATING
INSTRUCTIONS UNLADEN AND LADEN).
STOWING THE LIFT TRUCK
- Fix the chocks to the platform at the front and at the back of each tyre.
- Also fix the chocks to the platform on the inside of each tyre.
- Secure the lift truck on the platform using strong enough straps and the anchorage
points provided.
- Tighten the straps.
3 - 35
N° 24653
1
647737 M1 (A102020) TMM ... ST5 S1