Part Number 000007924 5/14 5
Section 1
General Information
Safety Notices
As you work on Manitowoc equipment, be sure to pay close
attention to the safety notices in this handbook. Disregarding
the notices may lead to serious injury and/or damage to the
equipment.
Throughout this handbook, you will see the following types of
safety notices:
Procedural Notices
As you work on Manitowoc equipment, be sure to read the
procedural notices in this handbook. These notices supply
helpful information which may assist you as you work.
Throughout this handbook, you will see the following types of
procedural notices:
NOTE: Text set off as a Note provides you with simple, but
useful, extra information about the procedure you are
performing.
Read These Before Proceeding:
Text in a Warning box alerts you to a potential
personal injury situation. Be sure to read the
Warning statement before proceeding, and work
carefully.
Text in a Caution box alerts you to a situation in
which you could damage the equipment. Be sure
to read the Caution statement before proceeding,
and work carefully.
Text in an Important box provides you with
information that may help you perform a
procedure more efficiently. Disregarding this
information will not cause damage or injury, but it
may slow you down as you work.
Proper installation, care and maintenance are essential
for maximum performance and trouble-free operation of
your equipment. Visit our website www.manitowocfsg.com
for manual updates, translations, or contact information
for service agents in your area.
Routine adjustments and maintenance procedures
outlined in this handbook are not covered by the warranty.
Read this manual thoroughly before operating, installing
or performing maintenance on the equipment. Failure to
follow instructions in this manual can cause property
damage, injury or death.
Do not use electrical appliances or accessories other than
those supplied by Manitowoc for your ice machine model.
Two or more people or a lifting device are required to lift
this appliance.
This equipment contains high voltage electricity and
refrigerant charge. Installation and repairs are to be
performed by properly trained technicians aware of the
dangers of dealing with high voltage electricity and
refrigerant under pressure.The technician must also be
certified in proper refrigerant handling and servicing
procedures. All lockout and tag out procedures must be
followed when working on this equipment.
Do not damage the refrigeration circuit when installing,
maintaining or servicing the unit.
To Next Page
Loading...
Need help?
General