96 Part Number STH025 11/16
6. Press the Checkmark. USB Stick will appear
highlighted.Press the Checkmark again. A submenu
with Export ALL and Export Setup appears.
NOTE:
There are four files stored in ice machine memory:
• Asset Data - ASDATAoo.CSV
• Operating Data - OPDATAoo.CSV
• Real Time Data - RTDATAoo.CSV
• Ice Machine Settings - Settinoo.CSV
Select only “Ice Machine Settings” file when multiple
machines will be programmed with the same user
specified settings. Select “Export All” if you are installing a
replacement board.
7. Highlight Export ALL or Export Setup, depending
on your requirements, and press the Checkmark. A
display of instructions will appear.
8. Follow these on-screen instructions to:
A. Insert Drive (Insert the flash drive into the USB
port on the ice machine’s control board.)
B. Press Check (Press the Checkmark.)
C. Wait For Comp (Wait approximately 5 to 10
minutes for the download to complete.)
D. Depending on software version either Export
Complete, Success or the Home screen will
appear.
To Next Page
Loading...
Need help?
General