4-7
Areas include; Valves, hose end and fittings, Swivel,
pumps, axles, drive lines, transmission, all interior
surfaces of the frame
• Frame application areas are; hose ends and fittings, all
unpainted fasteners and hardware, all bare metal
surfaces, outrigger pads, and back up alarms.
• Superstructure applications are; hose end and fittings,
wire rope on hoist roller tensioning springs on hoists, all
unpainted fasteners and hardware, valves, slew ring, all
bare metal surfaces.
• Boom applications areas are; pivot pins, hose end and
fittings, jib pins and shafts, all bare metal surfaces,
headache ball / hook block pins and fasteners.
• All hardware, clips, pins, hose connections not painted
will have Carwell applied.
Reference Only
To Next Page
Loading...
