OPERATOR AND SERVICE MANUAL
This manual has been prepared for and is considered part of -
900A
Crane Model Number
This Manual is divided into the following sections:
SUPPLEMENT
TABLE OF CONTENTS
SAFETY INFORMATION
OPERATING CONTROLS AND PROCEDURES
MAINTENANCE INSPECTION
LUBRICATION
SERVICE
SPECIFICATIONS
INSTALLATION CONFIGURATIONS
INSTALLATION PROCEDURES
OPTIONS
NOTICE
The crane serial number is the only method your distributor or the factory
has of providing you with correct parts and service information.
The crane serial number is identified on the builder’s decal attached to the
crane frame. Always furnish crane serial number when ordering parts
or communicating service problems with your distributor or the factory.
An untrained operator subjects himself and others to death or
serious injury. Do not operate this crane unless:
• You are trained in the safe operation of this crane. Manitowoc is not
responsible for qualifying personnel.
• You read, understand, and follow the safety and operating
recommendations contained in the crane manufacturer’s manuals and
load charts, your employer’s work rules, and applicable government
regulations.
• You are sure that all safety signs, guards, and other safety features are
in place and in proper condi
tion.
• The Operator’s Manual and Load Chart are in the holder provided on
crane.
DANGER
PUBLISHED 10-18-2011 CONTROL # 031-07
© 2011 Crane Group
Reference Only
To Next Page
Loading...
