11-8 3-29-2018 Control # 610-00
SAFETY DECALS NBT40-1 SERIES OPERATOR MANUAL
15
DANGER
Two Blocking the loadline will result in
Death or Serious Injury
• Do not two block the loadline by contacting the sheave head with
the downhaul weight.
• When using the aerial work platform, the loadline must be
stowed and the anti-two-block override flag must be placed in
the override position.
• The anti two block system does not function with the two block
override flag in the override position.
• Refer to manual for additional information.
16
DANGER
A free falling jib will result in Death or Serious Injury
• Before operating the crane check that jib is properly secured.
You must follow proper jib erection and stowing procedures. See
crane manufacturer’s manual.
• Before removing pins (C) when stowing jib, boom must be level
and fully retracted, and stow pin (A) must be properly located in
the side stow bracket through hole (D).
• Do not extend boom after removing jib swing pin (B) until boom
is in level position.
• When stowing or erecting jib, boom must be in level position.
17
DANGER
Improperly stowed jib will result in Death or Serious Injury
Stow pin (A) must be in stow bracket NOT here when jib is stowed.
18
DANGER
An improperly stowed jib will result in Death or Serious Injury
Before removing pins (C) when stowing jib, boom must be fully
retracted, and stow pin (A) must be properly located in the side stow
bracket through hole (D).
Item
Decal Explanation of Decal
To Next Page
Loading...
