Mantis Rawrr - Riding Rules, Restrictions, and Parking

Assembly
We recommend having a friend help with the assembly of the bike.
1. Place the headlight bracket on the upper
coupling plate, align all four (4) holes, and
snap the clamp nut in the slot in front of the
headlight bracket.
2. Put the handlebar on the headlight
bracket, align the holes. If desired, place the
included spacers to raise the handlebar.
Tighten the four (4) screws with a #5 allen
wrench.
Note: The 4 screws should be added with
bullet spacers
Step 1. Mount Handlebars