Step 3. Mount Front Wheel
1. Loosen the front wheel lock
nut with two #19 wrenches and
take out the shaft and nut.
2. Install the front axle bushings on
each side
Note: Do not crush the seal.
3 . Remove the front brake caliper, place the front wheel inside the fork, install
the front axle so that it passes through the fork and the front wheel in turn, and
fasten the front axle with two #8 allen wrenches.
Note:
1. Do not use the front brake lever after removing the caliper as it
can cause the brake pistons to clamp and make it difficult to put
the disc brake disc in.
2. When installing the front wheel, ensure proper fitment of the disc
brake disc and caliper. After installation, check that the front
wheel rotates smoothly and without any strange noise.
3. When installing the disc brake disc, apply a thread locking
compound (provided) to the threads.
15
To Next Page
Loading...
