Maono AU-AM200-S1 - User Manual

To Next Page

AU-AM200-S1 podcast bundle is covered by a limited warranty for two (2) year from the

date of purchase, and provides a lifetime of after-sale consulting service. Free replacement

to products that are NOT damaged resulting from accident, alteration, misuse, negligence,

or abuse. If exceeding 30 days of Amazon return policy, you can still contact us via the

following two ways: click Ask Seller or MAONO on your order page; or through our Shopify.

We will serve you with full sincerity!

MAONO AU-AM200-S1 2 Year Limited Warranty/lifetime of after-sale consulting service

Shopify link: https://www.maono.com/

E-mail: support@maono.com

Need help?

Do you have a question about the Maono AU-AM200-S1 and is the answer not in the manual?

Summary

Instructions for powering on the podcast console, including charging and long-pressing the power button.

Check external audio source connection, volume knob, device volume, and enable LOOP BACK.

Verify headphone cable connection, monitor fader position, and headphone jack used.

Check microphone connection, ensure microphone knob is on, adjust monitor fader, and confirm compatibility.

Check recording knob, set console as default audio device in software, and turn on LOOP BACK.

Turn off or reduce the ECHO effect to resolve echo problems.

The side chain function operates on podcasts or live streaming, not voice calls.

For optimal noise reduction, position the microphone approximately 2 inches from the mouth.

An OTG adapter is required for iPhone connection; use the one included with your iPhone package.

This audio interface only supports microphones with a 3.5mm plug, not USB microphones.

Connect a guitar using a 3.5mm to 6.35mm adapter.

General