Need help?Do you have a question about the Marantz PM673 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Frequency Response | 10Hz to 50kHz |
| Total harmonic distortion | 0.008% |
| Damping factor | 100 |
| Input sensitivity | 2.5mV (MM), 200mV (line) |
| Signal-to-Noise Ratio | 86dB (MM) |
| Speaker load impedance | 4Ω - 16Ω |
Lists necessary test equipment for servicing the Stereo Amplifier.
Details the location and mounting of printed circuit boards within the unit.
Details the steps for adjusting critical parameters like amplifier gain.
Provides a functional description of the unit's circuit design.
Explains the function and type of digital input/output pins for the microprocessor.
Details the function and type of various other pins on the microprocessor.
Shows voltage distribution for circuit diagrams of various components.
Details pin voltage information for QS01.
Describes the PL04 video amplifier section.
Lists necessary test equipment for servicing the Tuner section.
Details procedures for FM and AM tuner alignment.
Shows the physical locations of components on tuner boards.
Lists electrical components used in the tuner section.
Lists printed circuit boards associated with the cassette deck.
Lists necessary test equipment for servicing the cassette deck.
Describes the operations of audio and peripheral circuits in the deck section.
Describes the operational states of the cassette mechanism.
Details various electrical adjustments required for the deck.
Procedures for adjusting the playback output level.
Specifies audio output power and impedance.
Details specifications for the FM tuner section.
Details specifications for the MW tuner section.
Details specifications for the LW tuner section.
Provides general technical specifications for the unit.
Technical specifications for the SD873 model.
Service bulletin number and subject.
To Next Page