Installation Instructions
Before connecting the appliance to the power supply, let it stand for about 4 hours, which will reduce a possibility of
malfunctions in the cooling system due to transport handling.
Clean the appliance, and be thorough, especially in the interior (See “HOW TO CLEAN”).
In case the interior accessories are not correctly placed, rearrange them as described in “Parts Description”
Install the appliance in a convenient location away from extreme heat and cold. Allow sufficient clearance between the
fridge and side wall so the door will open without obstruction. The freezer is not designed for built in installation.
Select a space with strong level floor.
Try to allow a minimum of 5 inches of space between the appliance’s side and the wall.
Important
DANGER: Risk of child entrapment. Before you throw away your old appliance:
Remove the doors and/or lid.
Leave the shelves in place so that children may not easily climb inside.
The appliance must be correctly connected to the power supply, DO NOT use an extension cord.
Do not touch COLD or FROSTY surfaces while the appliance operates, especially with wet hands as the skin may
stick to the cold surface.
Disconnect the appliance from the power supply before repair or maintenance
Do not defrost the appli
ance with other electric devices (hair dryer etc.) and never scrape the ice or frost layer with
sharp tools.
The rating plate is on the back of the appliance.
To Next Page
Loading...
